Blackmore Company Packs & Flats
Nomenclature - Explanation of Terms
PACK SERIES
FLAT(S)
PACK SERIES
FLAT(S)
6-Pak Series See Schematics
P6-06
7.5 x 20
 F-6 7.5 x 20
P6-06
8 x 20
 F-6 8 x 20


F-6 8 x 20 low side
12-Pak Series See Schematics
P12-04T
10 x 20
P12-04
8.5 x 20
 F-12 8.5 x 20
10-Pak Series
See Schematics
15-Pak Series

18-Pak Series


3-06 Series
Misc. Packs
8-Pak Series See Schematics
P8-04T
10 x 20 T
 F-8 10 x 20T
3-Pak Series See Schematics
P3-06T
10 x 20 T
 F18 10 X 20 T
P3-06
8.5 X 21
 F3-06 8.5 X 21
P3-06
8.5 X 20
 F3-06 8.5 X 20
P3-06 7.5 x 20
# 8471
Note: All 3-06 Paks have holes for handles

NOMENCLATURE (Back to Top)
To avoid confusion, Blackmore often uses the name and size of the trays to describe them rather than type of code. In most cases our trays are made of recyclable polystyrene, the exception being the Web flats.

Where letters are used here is the legend:

F = Flat - the carrying tray required for most packs/inserts, made from recyclable high-impact plystyrene.

NR = No Rib - no support rib(s) in the senter or side of the tray so any matching outside dimension will fill into it.

P = Pack - sometimes referred to as "insert", placed in the flat/carrying tray.

T = True - 10 inch X 20 inch, or industry standard.

W = Web type - injection molded flat, typically made of polypropylene or polythylene and often re-used by growers or consumers.

For more information and availability contact us at trayinfo@blackmoreco.com.